Metal roofing prices in Murfreesboro vary based on material type, roof complexity, and whether you need installation, repair, or replacement. Most homeowners find that while metal roofing costs more upfront than asphalt shingles, its durability and energy efficiency often make it a smart long-term investment. We're here to help you understand the factors that affect your specific project so you can plan with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Murfreesboro and Rutherford County: panel systems built for hot humid summers, hail and straight-line wind, installed over synthetic underlayment with proper ventilation, careful flashing and details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Murfreesboro homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as humid heat and cold snaps move the roof, plus strong wind resistance and a cool reflective finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of worn, hail-bruised shingle or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers offer discounts for impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Murfreesboro brick ranches. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing hail-dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before spring thunderstorms become interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and porch transitions) and fixed right, not just caulked over. Emergency tarping available after severe storms. |
| Screw Replacement & Re-Fastening | From $750 | Murfreesboro's humid heat and cold snaps expand and contract metal roofs all year, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for homes, carports, barns and workshops across Rutherford County. Quality panels in reflective colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Murfreesboro homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for tornado-season storms. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish, with excellent hail and wind performance, a Class A fire rating, and profiles that mimic the shake and shingle looks common on Murfreesboro subdivision homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs, premium metals that develop a living patina on Victorian and Greek Revival homes. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and porch roofs, the number one leak point on older Murfreesboro roofs. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow guards and rail systems for metal roofs, rarely needed in Murfreesboro, but useful on steep slopes over entries and porches to stop an occasional ice storm's sheets of ice from sliding off at once. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind and tornado-season storm damage to metal roofing: thorough documentation with photos, an honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and UV wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden cloudbursts away from brick walls and foundations, with details that handle oak leaves and pollen debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across Rutherford County, from Lascassas and Rockvale farm buildings to shops along Old Fort Parkway, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and pitch : Larger roofs require more materials and labor, and steeper pitches can slow down installation, increasing overall cost.
- Material type and gauge : Standing seam, corrugated panels, stone-coated steel, and copper each have different price points, with thicker gauges and specialty metals costing more.
- Accessibility and roof complexity : Multiple stories, difficult access, or complex roof shapes with many valleys and penetrations can increase labor time and require special equipment.
- Existing roof condition and removal : If your old roof needs to be removed, or if there's damage to the decking, additional labor and disposal fees will apply.
What's included
- Travel included across the Murfreesboro area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage and pitch ready, and note any existing leaks or damage. A Murfreesboro Metal Roofing estimate includes a thorough inspection, material options, and a detailed breakdown of labor and materials, with no hidden fees. Call (629) 238-0812 to schedule your free estimate and get clear, upfront pricing for your project.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to material choice (e.g., corrugated steel vs. copper), roof complexity, labor rates, and whether removal of the old roof is needed. Each project is unique, so we provide a customized quote after assessing your specific needs.
Do you offer free estimates, and how soon can I schedule one?
Yes, we offer free estimates for all services. Call (629) 238-0812 to schedule an appointment at your convenience. We'll assess your roof and provide a detailed quote with no obligation.
What payment methods do you accept, and do you offer financing?
We accept cash, checks, and major credit cards. Financing options may be available for larger projects; please ask your representative for details during your estimate.