Serving the Murfreesboro area  ·  (629) 238-0812  ·  Open Mon-Sun 7am-7pm
📞 (629) 238-0812 Free Quote

Metal Roofing in Nolensville, TN (37135) · Local Professionals

Murfreesboro Metal Roofing · Fast response in Nolensville and the Murfreesboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+336Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Nolensville's mix of new large homes off Nolensville Road and historic farmhouses near the old town center means roofs here face very different demands. From the steep gables in Bent Creek to the low-pitch ranches along Rocky Fork Road, we've seen what works and what doesn't in 37135.

Homeowners in Nolensville call Murfreesboro Metal Roofing because we understand the local building stock and weather. Whether it's a standing seam roof on a new build near Mill Creek or a stone-coated steel retrofit on an older farmhouse, we bring the same attention to detail that has made us a trusted name in Murfreesboro and surrounding areas.

Metal Roofing in Nolensville (37135)

Nolensville sits on rolling terrain with thin red clay over limestone, and that affects everything from drainage to anchor points. Newer subdivisions like Bent Creek and Summerlyn have tight lots with HOA design rules, while older properties along Nolensville Road often have mature trees that drop debris and cause ice damming at the eaves. We know how to handle the grade changes and access challenges, whether it's a steep driveway or a backyard that slopes toward a creek. The mix of architectural shingle roofs from the 1990s and 2000s and older farmhouses means we often recommend standing seam for its clean look and durability, or stone-coated steel to match the historic aesthetic.

Our team has worked throughout Rutherford County and the surrounding areas, so we're familiar with the local permitting quirks and the soil conditions that can impact roof longevity. We've repaired wind-lifted panels after spring storms and replaced failed fasteners on roofs that were only a decade old. When we assess your roof, we consider the specific challenges of your property, not just the square footage.

Our services in Nolensville

How a Job Works in Nolensville

Step 1: Call us at (629) 238-0812 or request a free estimate online. We'll schedule a time to inspect your roof, taking into account your schedule and any HOA requirements. Our assessment includes checking the decking, flashing, and existing underlayment, and we'll discuss options that fit your budget and the style of your home.

Step 2: Once you approve the estimate, we handle the permitting with the local building department and coordinate with your HOA if needed. On installation day, our crew arrives early and works efficiently, protecting your landscaping and keeping noise to a minimum. For tighter lots in neighborhoods like Winterset, we plan material delivery and staging to avoid blocking driveways or streets.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeps for nails and debris removal. We walk the project with you to ensure everything meets your expectations and answer any questions. We don't consider a job complete until you're satisfied.

Pricing for metal roofing in Nolensville varies based on the type of system and the complexity of your roof. For example, corrugated and ribbed panel roofing starts at $5.50 per square foot, while standing seam starts at $10 per square foot. Stone-coated steel and metal shingle roofing both start at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local codes limit the number of layers. Repairs, such as fixing a leak or replacing fasteners, start at $450 and $750 respectively. These are ballpark figures; the actual cost depends on roof size, access, condition, and urgency. Call us at (629) 238-0812 for a free, no-obligation estimate tailored to your Nolensville home.

My house is in Bent Creek and has a steep roof with dormers. Can you install standing seam without it looking bulky?
Yes, standing seam is actually ideal for steep roofs and dormers because the panels are sleek and the fasteners are hidden. We custom-form the panels on site to fit the exact dimensions, including around dormers and valleys, so you get a clean, streamlined look that many Bent Creek homeowners prefer. We'll also discuss color options that comply with HOA guidelines.
A storm just blew through Nolensville and lifted some panels on my roof. How quickly can you respond?
We prioritize storm damage calls and can often provide a free inspection within 24 to 48 hours, depending on demand. Call us at (629) 238-0812 to schedule. We'll tarp any active leaks if needed and provide a detailed estimate for repairs or replacement, and we can help document the damage for your insurance claim.
What's the typical cost to replace a shingle roof with metal on a 2,500 square foot home in Nolensville?
For a 2,500 square foot home, a basic corrugated panel system might start around $13,750 (at $5.50/sq ft), while standing seam could start around $25,000 (at $10/sq ft). These are rough estimates; factors like roof pitch, number of penetrations, and tear-off of existing shingles will affect the final price. We recommend a free estimate for accurate numbers.
Do I need a permit to replace my roof in Nolensville, and does the historic district have extra rules?
Yes, roofing permits are generally required for replacements in Nolensville. The town's building department oversees permitting, and fees and inspection requirements vary. If your home is in a historic district, there may be design review for panel profile and color. We handle the permit application process for you and ensure compliance with local regulations.
My neighbor and I share a property line, and I'm worried about drainage from my new metal roof. What should I do?
It's smart to consider drainage before installation. We can design your gutter system to direct water away from the property line and prevent issues with neighbors. If you're in an HOA, check guidelines for gutter placement. We'll work with you to find a solution that respects property boundaries and keeps everyone happy.
Are you fully insured for work on my Nolensville property?
Absolutely. We carry general liability insurance and workers' compensation coverage for all our crews. This protects you and your property in the unlikely event of an accident. We're happy to provide proof of insurance upon request.
How often should I have my metal roof inspected in Nolensville's climate?
Given the hot humid summers, spring storms, and occasional ice, we recommend an annual inspection, especially after major weather events. Check for loose fasteners, debris in gutters, and signs of rust or sealant wear. We offer free inspections and can perform minor maintenance like tightening fasteners or cleaning gutters to extend your roof's life.
Why choose us?

Trusted professionals in Murfreesboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Murfreesboro

All your work handled by qualified professionals in Murfreesboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

336+ Verified Client Reviews in Murfreesboro

⭐⭐⭐⭐⭐ 4.9/5 · 336 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Murfreesboro · Response within 24h · No commitment · ☎ (629) 238-0812

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Murfreesboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm