Serving the Murfreesboro area  ·  (629) 238-0812  ·  Open Mon-Sun 7am-7pm
📞 (629) 238-0812 Free Quote

Metal Roofing in Rockvale, TN (37153) · Local Professionals

Murfreesboro Metal Roofing · Fast response in Rockvale and the Murfreesboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+336Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rockvale is farm country, plain and simple. If you live out here off Highway 99 or down the back roads near Rockvale Elementary, you know the look: older farmhouses with wide porches, working barns, and a growing number of newer homes on good-sized lots. The ground is thin limestone and red clay, and the weather does not mess around.

That is why folks in 37153 call us. We are Murfreesboro Metal Roofing, based just up the road, and we have put metal on plenty of Rockvale barns, farmhouses, and newer builds. We know how hail and straight-line wind treat a roof out here, and we know how to fix it right.

Metal Roofing in Rockvale (37153)

Rockvale sits on rolling farmland where the soil is shallow and the rock is close to the surface. That matters for roofing. Water does not soak in the way it does in deeper soil, so runoff from a big roof can pool near foundations or wash out gravel drives if the gutters and grading are not handled. We see a lot of barns and shops with exposed-fastener panels, and after a few years of freeze-thaw and summer storms, the screws start to back out and the washers dry up. That is usually where leaks begin. On the residential side, we run into steep farmhouse roofs and low-slope additions, and each one needs a different approach for flashing and ventilation. We also deal with tree limbs and debris from the oaks and hickories that line a lot of these properties, which can puncture a panel or clog a gutter in a hurry.

Our team has worked all over Rutherford County, from the historic homes near the square in Murfreesboro to the newer subdivisions off Cason Lane and the farmland out here. We know what holds up in this climate and what does not.

Our services in Rockvale

How a Job Works in Rockvale

Step 1 is simple: you call us at (629) 238-0812, and we set up a free on-site assessment. We walk the roof, check the fasteners, seams, and flashing, and look at how water is moving off the structure. We give you a straight answer on what needs repair and what can wait, and we put an estimate in writing.

Step 2 is the work itself. Out here, access can be tight, especially on older farm properties with gates, gravel lanes, or equipment parked close to the building. We plan for that. If a permit is needed for a replacement, we handle the paperwork with the local building department. We also coordinate with HOAs when a neighborhood has design rules about panel profile or color. We keep the job site organized and protect the landscaping as best we can.

Step 3 is cleanup and a final walkthrough. We haul off old material, sweep for nails, and make sure the gutters and downspouts are clear. You get a chance to look at the finished work with us before we pack up. We leave your property clean.

Pricing in Rockvale depends on the job. For a full metal roof installation, most homeowners see starting rates around $8 per square foot, with standing seam starting at $10 and metal shingle or stone-coated steel at $9. A replacement typically starts at $9 per square foot, and a retrofit over existing shingles starts at $7. Repairs and leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney work starts at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. The biggest cost factors are roof size, pitch, access, and how much damage is already there. Storm work is urgent, and we offer a free inspection to get you a clear number. Call (629) 238-0812 for a free estimate.

My barn off Highway 99 has screws backing out and a few leaks. Can you fix that without replacing the whole roof?
Yes, that is one of the most common calls we get in Rockvale. On exposed-fastener barns and shops, the washers on the screws dry out and the fasteners back out over time, especially with our freeze-thaw cycles. We replace the failed screws with new ones that have proper sealing washers, re-fasten the panels, and check the seams and flashing. If the panels are still sound, a screw replacement and re-fastening job starting at $750 can add years to the roof. We will tell you honestly if a repair is not worth it.
A storm just took off some panels on my roof in Rockvale. How fast can you get out here?
We treat storm damage as a priority. Call us at (629) 238-0812 and we will schedule a free inspection as soon as possible, usually within a day or two depending on how many calls we are handling after a storm. We can tarp or secure the area to prevent further water damage, document what we find for your insurance claim, and give you a written estimate for the repair. We never promise coverage, but we do provide the documentation your adjuster will need.
What does a metal roof cost for a typical Rockvale farmhouse or ranch home?
For a typical single-story ranch or farmhouse in Rockvale, a metal roof installation often starts around $8 per square foot, but the final number depends on the roof size, pitch, and how many penetrations (chimneys, skylights, vents) need flashing. Standing seam runs more, starting at $10 per square foot, and a retrofit over existing shingles starts at $7. Repairs are usually a few hundred dollars, with leak repairs starting at $450. We give free estimates so you get a real number for your specific roof.
Do I need a permit to replace my roof in Rockvale, and who handles it?
In most cases, a full roof replacement or re-roof requires a permit, and the rules vary by jurisdiction. Rutherford County and the City of Murfreesboro have their own requirements, and Rockvale falls under county jurisdiction for many properties. We handle the permit application and coordinate inspections with the local building department as part of the job. We always verify the current rules before we start, so you do not have to worry about the paperwork.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage problems for them. What should I do?
That is a fair concern in Rockvale, where lots are often larger and drainage can affect a neighbor's field or driveway. We design the gutter and downspout layout to direct water away from the structure and toward a safe discharge point on your property. If your HOA has rules about roof color or panel style, we can help you get approval before ordering materials. For property line issues, we recommend talking with your neighbor and checking your plat or deed for any drainage easements. We are happy to walk the site with you.
Are you insured for work on my Rockvale property?
Yes, we are fully insured. We carry general liability insurance and workers' compensation coverage for our crew. That protects you and your property if anything goes wrong on the job.
What maintenance does a metal roof need in Rockvale to handle the hail and wind?
Metal roofs are tough, but they are not maintenance-free. In Rockvale, we recommend an annual inspection, especially after hail season in the spring and before winter. We check the fasteners for tightness, look for lifted panels or seam separation, clear debris from gutters and valleys, and make sure the flashing around chimneys and skylights is sealed. Catching a few loose screws early can prevent a leak that damages your ceiling. We offer free inspections to help you stay ahead of it.
Why choose us?

Trusted professionals in Murfreesboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Murfreesboro

All your work handled by qualified professionals in Murfreesboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

336+ Verified Client Reviews in Murfreesboro

⭐⭐⭐⭐⭐ 4.9/5 · 336 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Murfreesboro · Response within 24h · No commitment · ☎ (629) 238-0812

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Murfreesboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm