Serving the Murfreesboro area  ·  (629) 238-0812  ·  Open Mon-Sun 7am-7pm
📞 (629) 238-0812 Free Quote

Metal Roofing in Christiana, TN (37037) · Local Professionals

Murfreesboro Metal Roofing · Fast response in Christiana and the Murfreesboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+336Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Christiana is the kind of small farm community where a metal roof just makes sense: modest ranch homes, barns, and workshops spread across flat farmland, with sheds and outbuildings that need to shed heavy rain and stand up to straight-line wind. If you live off Highway 231 or near Christiana Elementary, you already know that shingle roofs take a beating here and that a good metal roof can last decades longer.

Homeowners in Christiana (37037) call Murfreesboro Metal Roofing because we understand the local building stock, from older farmhouses with low-pitch roofs to newer homes on larger lots. We are based just up the road in Murfreesboro and know the area well, including the stretch along Christiana Road and the quiet subdivisions tucked off the main highway.

Metal Roofing in Christiana (37037)

Christiana sits on flat to gently rolling farmland with thin red clay over limestone, which means drainage and ground stability are usually straightforward, but access can be tight on older farm properties with gravel drives and mature trees. Many homes here have low-pitched roofs that were originally shingled, and those are prime candidates for a metal retrofit or a corrugated panel system. We also see a lot of outbuildings, sheds, and barns that need affordable, durable roofing like ribbed panels. The open terrain means wind can get under edges and lift panels if fasteners are not set right, so we pay close attention to fastening patterns and flashing details.

Our team has worked on everything from small farm workshops to full residential replacements in the Christiana area. We know the local building department requirements and can help you navigate permits for a re-roof or new installation.

Our services in Christiana

How a Job Works in Christiana

Step 1: You call us at (629) 238-0812 or request a free estimate online. We schedule a time to come out to your Christiana property, inspect the existing roof, take measurements, and discuss your options. We will check the decking, flashing, and any problem areas, and give you a written estimate on the spot or shortly after.

Step 2: Once you approve the estimate, we pull the necessary permits (if required) and schedule the work. For farm properties, we plan around access and equipment needs. Our crew removes the old roofing, makes any needed repairs to the deck, and installs your new metal roof according to manufacturer specs. We keep the site tidy and protect your landscaping.

Step 3: After installation, we do a thorough cleanup, including magnet sweeping for nails, and walk the project with you to make sure you are satisfied. We do not leave until you have a clean property and a roof you can trust.

Pricing for metal roofing in Christiana depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical ranch home, corrugated and ribbed panel roofing starts around $5.50 per square foot, while standing seam runs about $10 per square foot. A full metal roof replacement starts around $9 per square foot, and repairs like leak fixes or flashing work start at $450. We always provide a free, no-obligation estimate so you know exactly what to expect. Call (629) 238-0812 to schedule yours.

Do you work on farm buildings and sheds in Christiana?
Yes, we frequently install corrugated and ribbed panel roofing on barns, sheds, and workshops around Christiana. These buildings often have simple roof lines and benefit from affordable, durable metal panels that handle wind and rain well. We can also repair or re-fasten existing metal roofs on outbuildings.
How quickly can you respond to storm damage in Christiana?
We offer free inspections for storm and wind damage and prioritize emergency repairs. If a storm has lifted panels or caused a leak, call us at (629) 238-0812 and we will schedule a visit as soon as possible, often within a day or two depending on demand.
What does a metal roof cost for a typical Christiana home?
For a standard single-story ranch, expect corrugated panel roofing to start around $5.50 per square foot installed, and standing seam around $10 per square foot. A full replacement with metal shingles or stone-coated steel typically starts around $9 per square foot. Factors like roof pitch, number of penetrations, and material choice affect the final price.
Do I need a permit for a metal roof in Christiana?
Rutherford County and the City of Murfreesboro have permitting requirements for roofing, and Christiana falls under county jurisdiction for many properties. A permit is usually required for a full replacement, and rules vary, so we always check with the local building department before starting work. We handle the permit application for you.
What if my neighbor's tree hangs over my roof in Christiana?
Property line disputes are common in older Christiana neighborhoods. If a neighbor's tree branches over your roof, you generally have the right to trim branches that cross the property line, but it is best to talk with your neighbor first. We can trim back overhanging limbs during installation to prevent damage and reduce debris.
Are you fully insured for roofing work in Christiana?
Yes, we carry general liability insurance and workers' compensation coverage for all our employees. We are happy to provide proof of insurance before we start any work on your property.
How often should I have my metal roof inspected in Christiana?
We recommend an inspection every two to three years, especially after major storms. Christiana's humid summers and occasional ice storms can loosen fasteners or damage seals. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Murfreesboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Murfreesboro

All your work handled by qualified professionals in Murfreesboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

336+ Verified Client Reviews in Murfreesboro

⭐⭐⭐⭐⭐ 4.9/5 · 336 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Murfreesboro · Response within 24h · No commitment · ☎ (629) 238-0812

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Murfreesboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm