Serving the Murfreesboro area  ·  (629) 238-0812  ·  Open Mon-Sun 7am-7pm
📞 (629) 238-0812 Free Quote

Metal Roofing in Shelbyville, TN (37160) · Local Professionals

Murfreesboro Metal Roofing · Fast response in Shelbyville and the Murfreesboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+336Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Shelbyville still has plenty of historic homes around the square and farm lots out on the old roads, and a lot of those roofs are older tin or worn shingles that need real attention. If you live near the Celebration or off Highway 231, you know how fast a summer storm can find a weak seam or a loose fastener.

We are Murfreesboro Metal Roofing, and we serve Shelbyville (37160) from just up the road. Homeowners call us because we know the older housing stock here, from the Victorian-era places near downtown to the brick ranches and farmhouses out toward Wartrace and Unionville. We handle repairs, replacements, and new metal roofs, and we are fully insured with general liability and workers' compensation.

Metal Roofing in Shelbyville (37160)

Shelbyville sits in the rolling farmland of Bedford County, and the ground here is a mix of red clay and limestone that can make drainage and access tricky on sloped lots. A lot of properties have mature trees, so leaf debris and pollen build up in valleys and gutters, and that is where we see a lot of leaks start. Older homes near the historic downtown often have steep gables and deep porches, which means flashing details around chimneys and porch roofs need careful work. Out on the farm lots, you have barns and workshops with corrugated panels that take a beating from wind and hail, and we repair and replace those too. The housing mix runs from 19th-century Greek Revival and Italianate places to 1960s brick ranches and newer subdivision homes, so we tailor the panel profile and color to the house, not the other way around.

Our team has worked on roofs across Shelbyville and the surrounding areas, including older tin roofs that need re-fastening and copper accents on historic homes. We know how to match the look of an older neighborhood while giving you a roof that handles Tennessee weather.

Our services in Shelbyville

How a Job Works in Shelbyville

Step 1: You call us at (629) 238-0812 or request a free estimate, and we set up a time to come out. We walk the roof, check the attic if you have one, and look at flashing, fasteners, and drainage. We give you a written estimate with options, and we do not pressure you.

Step 2: Once you approve, we pull the permit if one is required. In Shelbyville, roofing permits are commonly needed for a full replacement, and the rules vary, so we confirm with the local building department before we start. If you are in a historic district or an HOA, we help with the design review paperwork and color choices. On tight lots or steep drives, we plan material delivery and staging so we do not block your neighbors.

Step 3: We clean up every day and do a final walkthrough with you. We haul off old materials, run a magnet over the yard for nails, and make sure gutters and downspouts are clear. You get a walkthrough of the finished roof and our warranty information.

Pricing in Shelbyville depends on the size and pitch of your roof, access, and the condition of the decking. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you want to go over existing shingles, retrofit starts at $7 per square foot, but code limits how many layers you can have, so we check that first. Repairs start at $450, and leak repairs start at $450. Screw replacement and re-fastening starts at $750. Corrugated panel roofing starts at $5.50 per square foot, and stone-coated steel or metal shingle starts at $9. Copper and specialty metal starts at $20. Coating and painting starts at $2.50 per square foot. Flashing and chimney repair starts at $600, and snow guards start at $1,200. Gutters for metal roofs start at $9 per linear foot. Call us at (629) 238-0812 for a free estimate that fits your actual roof.

My farmhouse out toward Unionville has an old tin roof with some rust and loose nails. Can you repair it or do I need a full replacement?
We see a lot of older tin roofs on farm properties around Shelbyville, and it depends on how much rust and how many fasteners have failed. If the panels are still solid, we can re-fasten, replace screws, and treat surface rust. If there are holes or large rusted areas, a replacement or a retrofit over the existing roof may make more sense. We give you a free inspection and honest options.
A storm just took off some panels on my roof near the square. How fast can you get out?
We prioritize storm and wind damage calls in Shelbyville and the surrounding areas. Call us at (629) 238-0812, and we will schedule a free inspection as soon as possible, often within a day or two depending on the weather. We can tarp active leaks and make temporary repairs to prevent more damage while we prepare a permanent fix.
What does a typical metal roof repair cost in Shelbyville?
Most repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. The final price depends on the size of the repair, how accessible the area is, and whether we find hidden damage like rotten decking or failed flashing. We give you a written estimate before any work begins.
Do I need a permit to replace my roof in Shelbyville?
Roofing permits are commonly required for a full replacement or re-roof in Shelbyville, and the thresholds and fees vary. We confirm the current requirements with the local building department before we start, and we can pull the permit for you. If your home is in a historic district, there may be additional design review, and we help with that paperwork.
My neighbor and I share a property line, and my new metal roof will overhang slightly. Do I need their permission or HOA approval?
Property line rules in Tennessee generally allow a roof to overhang your own property, but if it crosses the line or drains onto a neighbor's lot, you may need an easement or permission. If you are in an HOA, check the covenants for roof color and profile approval before you order materials. We can provide product specs and color samples to help with the HOA submission.
Are you insured for work on my Shelbyville property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What should I do to maintain my metal roof in Shelbyville between storms?
Keep gutters and valleys clear of leaves and pollen, especially if you have oak or maple trees nearby. Twice a year, check for loose fasteners, lifted panels, or debris after storms. In winter, watch for ice damming at the eaves, which can happen on older homes with poor attic ventilation. We offer inspections and maintenance plans to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Murfreesboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Murfreesboro

All your work handled by qualified professionals in Murfreesboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

336+ Verified Client Reviews in Murfreesboro

⭐⭐⭐⭐⭐ 4.9/5 · 336 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Murfreesboro · Response within 24h · No commitment · ☎ (629) 238-0812

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Murfreesboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm