Serving the Murfreesboro area  ·  (629) 238-0812  ·  Open Mon-Sun 7am-7pm
📞 (629) 238-0812 Free Quote

Metal Roofing in Lebanon, TN (37087) · Local Professionals

Murfreesboro Metal Roofing · Fast response in Lebanon and the Murfreesboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+336Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lebanon's mix of historic downtown homes and fast-growing subdivisions means roofs here face very different demands, from steep gables near the Square to low-slope shingles off Highway 109. If your roof is showing its age, we can help you sort out repair, replacement, or a metal roof over your existing shingles.

Homeowners in 37087 call Murfreesboro Metal Roofing because we know the local building stock and the weather that wears it down. Whether you're near the Lebanon Square, off South Maple Street, or out toward Highway 231, we bring straight answers and metal roofing that fits your home and your budget.

Metal Roofing in Lebanon (37087)

Lebanon sits in the Nashville Basin with thin red clay over limestone, and that ground moves with the seasons. Older homes near the Historic Downtown square and along East Main Street often have steep gables and deep porches, which means flashing details and panel layout need extra care. Newer subdivisions off Highway 109 and near Lebanon High School have large shingle roofs on tighter lots, so access and staging can be tricky. Out toward Gladeville and the farmland along Highway 70, barns and workshops often go with corrugated or standing seam panels that handle wind and hail better than shingles. We also see ice damming at the eaves on higher-elevation homes and wind-lifted panels after spring storms, so we match fasteners and seam types to the exposure.

Our team has worked across Wilson County and the surrounding area, including retrofit projects over existing shingles where code allows. We know how local inspectors look at roof decks and underlayment, and we plan for the afternoon thunderstorms that roll through in summer.

Our services in Lebanon

How a Job Works in Lebanon

Step 1: You call (629) 238-0812 or request a free estimate online. We schedule an on-site assessment, check your roof deck, flashing, and attic ventilation, and talk through repair versus replacement. We also flag any HOA or historic district review that might apply before you commit to a panel profile or color.

Step 2: Once you approve the scope, we pull the required roofing permit with the City of Lebanon or Wilson County as applicable, order materials, and schedule the work. On tighter subdivision lots, we plan delivery and staging to keep driveways clear. For retrofits over shingles, we verify the existing layers meet code before we start.

Step 3: After installation, we magnet-sweep the yard, haul away old materials, and walk the roof with you to confirm seams, fasteners, and flashing are clean. We leave your property as tidy as we found it and give you a clear maintenance checklist for the seasons ahead.

Pricing in Lebanon depends on roof size, pitch, access, and whether we are repairing or replacing. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney repair around $600. Coating and painting start around $2.50 per square foot, and gutters for metal roofs start around $9 per linear foot. Storm and wind damage inspections are free. The biggest cost factors are roof complexity, number of penetrations, and urgency after a storm. Call (629) 238-0812 for a free, no-pressure estimate.

My 1950s brick ranch near Lebanon High School has two layers of shingles. Can you install metal over them?
Sometimes, but code limits how many existing layers you can recover over, and the deck condition matters. We inspect the shingles and flashing first, then tell you whether a retrofit makes sense or if a full tear-off is the safer path. We verify the layer count and local requirements before quoting.
A storm just peeled back panels on my barn off Highway 231. How fast can you get out?
We prioritize active leaks and wind damage. Call (629) 238-0812 and we will schedule an inspection, usually within a day or two depending on storm volume. We can tarp or secure the area to prevent further water intrusion while we prepare a repair plan.
What does a typical metal roof replacement cost for a 2,000 square foot home in the 37087 area?
Most homeowners in that size range see quotes in the low-to-mid five figures, depending on panel type, pitch, and how much flashing and deck repair is needed. Standing seam costs more than corrugated or ribbed panels. We provide a line-item estimate after the on-site assessment so you can compare options.
Do I need a permit from the City of Lebanon for a metal roof replacement?
In most cases, yes. A full replacement or re-roof typically requires a roofing permit, and the City of Lebanon or Wilson County will inspect the work. Requirements vary by jurisdiction and by project scope, so we confirm the rules with the local building department before we start and handle the paperwork for you.
My HOA in a Lebanon subdivision has design rules. Can you help with approval for a metal roof?
We can provide panel samples, color chips, and specification sheets for your HOA submission. Some associations restrict panel profiles or colors, so it is best to get approval before ordering materials. We will coordinate with your HOA contact and adjust the plan if their review requires a different product.
Are you fully insured for roofing work at my Lebanon property?
Yes. We carry general liability insurance and workers' compensation coverage. We can provide a certificate of insurance for your records before work begins, and we recommend asking any contractor for the same documentation.
What maintenance should I do on a metal roof in Lebanon to prevent leaks?
Keep gutters clear of leaves and pollen, especially after spring and fall. Check fasteners and sealant around flashing and penetrations once a year, and look for lifted panels after heavy wind. Ice damming can happen at the eaves during winter storms, so proper attic insulation and ventilation matter. We offer inspections if you want a professional set of eyes.
Why choose us?

Trusted professionals in Murfreesboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Murfreesboro

All your work handled by qualified professionals in Murfreesboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

336+ Verified Client Reviews in Murfreesboro

⭐⭐⭐⭐⭐ 4.9/5 · 336 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Murfreesboro · Response within 24h · No commitment · ☎ (629) 238-0812

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Murfreesboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm