Licensed & Insured, in Murfreesboro and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Murfreesboro
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (629) 238-0812 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Murfreesboro and surrounding areas · On-site visits included · Free estimate within 24h
Murfreesboro Metal Roofing is a team of local certified professionals based in Murfreesboro. We respond quickly in Murfreesboro and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (629) 238-0812⭐⭐⭐⭐⭐ 4.9/5 · 336 verified Google reviews
“We needed a metal roof on our new hay barn out in the Eagleville area and these guys knocked it out in about three days. The crew of four was professional and the corrugated panels went up straight and clean. Way better than the old wooden structure we had before.”
Commercial & Agricultural Metal Roofing
“Had a beautiful copper roof installed on our 1920s home and I could not be happier with how it turned out. The crew clearly knew what they were doing with the specialty metal and took their time getting every seam just right. It's a big investment but the craftsmanship shows.”
Copper & Specialty Metal Roofing
“Our old equipment shed out in Walterhill had a rusted metal roof that was leaking everywhere. They came out, tore off the old panels and put up new ribbed metal in a single day. Cleaned up every last screw and scrap too. Really relieved to have that done before winter.”
Commercial & Agricultural Metal Roofing
“Got a metal roof installed on our brick house and it looks amazing against the brick. Crew of three finished the whole thing in two days and the cleanup was spotless. Only small thing was they showed up a bit later than scheduled the first morning, but honestly the work speaks for itself.”
Metal Roof Installation
“We had a persistent leak around our chimney every time it rained hard. These folks came out, found the failed flashing, and redid the whole seal around it in a few hours. Haven't had a drop since. Grateful I didn't have to replace the entire roof.”
Flashing, Chimney & Skylight Repair
“Replaced our old shingle roof with a standing seam metal roof and it's like a whole new house. The crew was in and out in three days and you couldn't even tell they'd been here except for the gorgeous new roof. Should've done this years ago.”
Metal Roof Replacement
“Went with the metal-over-shingles retrofit on our brick ranch and I was surprised how fast it went, two days flat. No tear-off mess, no dumpster in the driveway for a week. The new panels look sharp and the price was way more reasonable than a full replacement.”
Metal Roof Over Shingles (Retrofit)
“Full tear-off and replacement on our brick house after the spring storms beat it up. They handled the storm damage repair and got the new metal roof on in under a week. Communication was decent, though I had to call once for an update. Overall solid work and the house looks great.”
Metal Roof ReplacementReal photos of our work in Murfreesboro · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment and basic trim; roof pitch and access move the price. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and formed panels; complexity of valleys and dormers raises the rate. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Textured panels for HOA or historic profiles; chimney and skylight count adds labor. |
| Complex or large-scale roof | On estimate | Steep pitch, multiple stories and heavy flashing work need an on-site look before pricing. |
| Travel | Included | In Murfreesboro and surrounding Rutherford County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes tear-off, underlayment, panels, trim, and cleanup on a straightforward single-pitch roof with good access. |
| Standing seam, complex roof with multiple gables | Starting at $13/sq ft | Adds panel cutting, extra flashing, and labor for steep pitches, valleys, and multiple penetrations like chimneys and skylights. |
| Standing seam over existing shingles | Starting at $11/sq ft | Includes purlin system and panels over a sound deck where local code allows a retrofit without full tear-off. |
| Standing seam with snow guards | Add $1 to $2/sq ft | Adds guard brackets and installation on steep roofs or where walkways and entries sit below the roofline. |
| Complex or large-scale job | On estimate | Steep historic homes, multiple roof levels, or commercial and agricultural buildings need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (629) 238-0812, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment and new corrugated or ribbed panels with washered fasteners. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and raised seams; price moves with panel gauge, roof pitch and valley count. |
| Metal shingle or stone-coated steel | Starting at $13/sq ft | Impact-resistant stamped panels; cost rises with hip and valley complexity and HOA color requirements. |
| Copper and specialty metal | On estimate | Material cost and soldered detailing vary widely; needs an on-site look before a number is given. |
| Deck repair and flashing add-ons | Quoted per job | Rotted sheathing, chimney flashing and ventilation corrections priced after the tear-off inspection. |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles, simple ranch | Starting at $7/sq ft | Includes purlin grid, underlayment, standard panels and flashing on an accessible low-pitch roof |
| Retrofit with standing seam upgrade | Starting at $11/sq ft | Concealed fasteners and premium panels, priced higher on cut-up roofs with valleys and dormers |
| Retrofit with deck repairs | On estimate | Soft decking found during the probe is quoted per section before any metal is ordered |
| Tear-off and full replacement | On estimate | Required when layer count exceeds code or pitch and deck condition rule out a retrofit |
| Estimate and deck inspection | Free | On-site walk and probe, response within 24 hours at (629) 238-0812, no obligation |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener and screw repair | Starting at $450 | Includes replacing backed-out screws and washers, resetting panels; price rises with roof height and access. |
| Single panel replacement | Starting at $650 | Covers one matching panel, sealant and flashing check; higher pitch or second story adds labor. |
| Flashing and penetration repair | Starting at $550 | Rebuilds chimney, skylight or sidewall flashing; complexity of the penetration drives the final number. |
| Storm damage assessment and repair | On estimate | Needs an on-site look to separate storm damage from wear and document the scope for insurance. |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted leak repair (single source) | Starting at $450 | Includes inspection, water test, and repair of one failed fastener or seam location. |
| Flashing, chimney, or skylight rebuild | Starting at $750 | Covers new step flashing and counterflashing at one penetration, priced by access and height. |
| Panel and decking replacement | On estimate | Needs an on-site look to measure rotted decking and match panel profile and color. |
| Emergency tarping after storm | Starting at $350 | Same-day watertight cover, with the tarp cost credited toward the permanent repair. |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers replacing failed screws and washers on a limited failure area, with roof size and pitch driving the price up. |
| Full slope re-fastening | Starting at $1,200 | Re-fastens the sun-baked or wind-exposed slopes, with panel count and access affecting the final number. |
| Full field re-fastening | Starting at $2,400 | Replaces every fastener with UV-rated washers and correct torque, priced by roof square footage and panel condition. |
| Complex or large-scale job | On estimate | Barns, shops, and roofs with torn panels or wallowed holes need an on-site look before a number is given. |
| Travel | Included | In Murfreesboro and surrounding areas, with no separate call-out or mileage fee added to the bill. |
| Estimate | Free | Response within 24h at (629) 238-0812, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, standard gable | Starting at $5.50/sq ft | Includes panels, underlayment, closures and basic trim; pitch and tear-off move the price. |
| Ribbed R-panel roof, ranch or workshop | Starting at $6.25/sq ft | Includes 26-gauge panels and screw pattern; penetrations and valleys add labor. |
| 5V crimp roof on older home | Starting at $6.75/sq ft | Includes period-profile panels and trim; historic review or HOA approval may add lead time. |
| Complex or large-scale job | On estimate | Multiple chimneys, skylights, steep pitch or long panel runs need an on-site measure first. |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation (new construction or full replacement) | Starting at $9/sq ft | Includes tear-off of one layer, synthetic underlayment, panels, fasteners, and standard flashing. |
| Metal shingle roof over existing shingles (retrofit) | Starting at $7.50/sq ft | Covers a single sound shingle layer with new underlayment and metal shingles; deck condition must be verified. |
| Metal shingle roof repair (storm, leak, or panel damage) | Starting at $450 | Includes inspection, leak trace, and replacement of damaged panels or flashing; access and pitch affect the total. |
| Complex or large-scale job (steep gables, dormers, multiple valleys) | On estimate | Steep pitch, multiple roof planes, and historic-district detailing need an on-site look before pricing. |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (629) 238-0812, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel install, simple gable | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and trim on a basic gable roof. |
| Stone-coated steel install, complex roof | Starting at $12/sq ft | Covers multiple valleys, hips, and penetrations that slow the install. |
| Retrofit over existing shingles | Starting at $8/sq ft | Skips tear-off where code allows one sound layer of shingles. |
| Barn or outbuilding panels | On estimate | Needs an on-site look for span, gauge, and access before pricing. |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch cap or bay window accent | Starting at $20/sq ft | Includes custom-formed copper panels, concealed cleats and trim; access and roof pitch move the price. |
| Zinc or aluminum accent cladding | Starting at $18/sq ft | Includes panels, underlayment and trim for dormers and entry canopies; panel count and detail work affect cost. |
| Copper flashing and trim package | Starting at $45/linear ft | Includes custom-bent step flashing, valleys and chimney surrounds; number of penetrations drives the total. |
| Full architectural specialty metal roof | On estimate | Scope varies widely by metal, roof size and detail count, so we measure on site before quoting. |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, standard ranch roof | Starting at $2.50/sq ft | Includes wash, light rust treatment, and one reflective coating system on accessible low-slope panels |
| Corrugated or ribbed exposed-fastener roof | Starting at $2.75/sq ft | Includes fastener check, rust treatment at washers and laps, and direct-to-metal coating |
| Steep or cut-up roof with dormers and valleys | Starting at $3.25/sq ft | Higher labor for fall protection, detail work, and slower coverage on complex geometry |
| Heavy rust or failed finish restoration | On estimate | Needs on-site assessment of pitting and fastener condition before a coating number is given |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pipe boot or vent collar replacement | Starting at $600 | Includes new UV-rated boot, sealant and fastener check at one penetration |
| Single chimney re-flash | Starting at $1,200 | Custom-bent step and counter-flashing on one chimney side, includes sealant and fasteners |
| Skylight curb rebuild | Starting at $1,500 | Removes old curb flashing, re-flashes opening and re-sets skylight with water test |
| Valley, dormer or multi-penetration repair | On estimate | Scope depends on access height, number of penetrations and condition of deck underneath |
| Travel | Included | in Murfreesboro and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single porch or entry run | Starting at $1,200 | Includes layout, clamp-on or fastened guards, and sealant for one fall zone on a one-story roof. |
| Multiple fall zones | Starting at $1,800 | Covers two or three entries, walkways, or driveways on the same roof with matched hardware. |
| Two-story or steep-pitch roof | On estimate | Higher access and staging time on steep gables, so we need to see the roof before quoting. |
| Complex or large-scale job | On estimate | Long runs, multiple roof planes, or mixed panel types need an on-site measure and hardware spec. |
| Travel | Included | In Murfreesboro and surrounding areas with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (629) 238-0812 with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof inspection with dated photos, written findings and a repair-versus-replacement recommendation. |
| Minor repair (fasteners, seams) | Starting at $250 | Re-securing lifted seams and replacing backed-out screws; price rises with panel count and roof pitch. |
| Panel or flashing repair | Starting at $600 | Replacing damaged panels or rebuilding compromised flashing; matching material availability is the main variable. |
| Partial or full re-roof | On estimate | Widespread hail or limb damage needs an on-site measurement and scope before any number is given. |
| Insurance documentation | Included | Photo packet and written scope prepared for your adjuster with every storm damage inspection, no extra charge. |
| Travel | Included | In Murfreesboro and surrounding Rutherford County communities, with no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection, single-story ranch | Free estimate | Includes fastener, seam and flashing check with written summary and photos |
| Roof inspection, steep or multi-story home | Starting at $250 | Adds fall-protection setup and time for steep gables and multiple chimneys |
| Post-storm insurance documentation | Starting at $300 | Detailed photo report of hail and wind damage for your claim file |
| Pre-purchase inspection report | On estimate | Full written report with remaining service life call, scoped after a site look |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard 5-inch seamless gutter run | Starting at $9/linear ft | Includes formed trough, hidden hangers, and basic downspouts on accessible single-story eaves. |
| 6-inch high-capacity system | Starting at $13/linear ft | Larger trough and extra downspouts for steep standing seam roofs and heavy oak canopy. |
| Leaf guard or screen add-on | Starting at $6/linear ft | Covers the trough to block oak leaves and pollen, priced per foot on top of the gutter run. |
| Two-story or steep-pitch access | On estimate | Steep gables and tight side yards need extra safety setup, so we price after a site walk. |
| Travel | Included | In Murfreesboro and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (629) 238-0812, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or workshop roof repair | Free estimate | Includes roof walk, fastener inspection and written scope covering panel patching and screw replacement |
| Exposed fastener panel roof | Starting at $4.50 per sq ft | Installed corrugated or ribbed panels with closures and fasteners, price moves with deck condition and access |
| Standing seam commercial roof | Starting at $9.00 per sq ft | Concealed fastener panels with flashing and trim, higher on buildings with rooftop equipment or steep access |
| Re-fastening and screw replacement | Starting at $1.75 per sq ft | Replaces failed screws and washers on sound panels, priced by roof size and how many fasteners have backed out |
| Insulated panel system | On estimate | Needs an on-site look at purlin spacing, ventilation and condensation control before a number is given |
| Estimate and travel | Free | In Murfreesboro and surrounding areas, no mileage fee, response within 24 hours at (629) 238-0812 |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Murfreesboro want a crew that knows this ground: steep gables on the historic homes around the downtown square, low-pitch brick ranches out toward Old Fort and Cason Lane, and the newer subdivision roofs across Blackman, Siegel, and Stewarts Creek. Murfreesboro Metal Roofing is the local name for metal roof installation, replacement, re-roof, and repair, and we serve Murfreesboro, Smyrna, La Vergne, Eagleville, and Nolensville with a network of licensed, bonded, and insured local contractors.
We work on the roofs this city actually has: steep pitches, heavy oak and hickory cover that fills gutters with leaves and pollen, and a large stock of 15 to 30 year old exposed-fastener roofs whose screws are backing out. Whether you need a standing seam system on a farmhouse near Lascassas or a leak traced on a 1960s ranch, you get straight guidance instead of a sales pitch.
Most metal roof leaks in Murfreesboro start at a fastener. On the 15 to 30 year old screw-down roofs common across Rutherford County, the EPDM sealing washer under each screw dries, shrinks, and cracks, and water finds its way in. The other usual suspects are seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels after a spring or fall storm, and punctures from fallen limbs. Catch these early and the fix is often minor. Ignore them and water tracks along purlins and decking far from the entry point, rotting sheathing and soaking insulation before you ever see a stain inside.
Our metal roof leak repair starts with finding the actual source, not guessing from the ceiling stain. Sometimes that means a targeted repair at a flashing detail or a handful of failed fasteners. Often it means a full screw replacement and re-fastening, which restores a watertight roof for a fraction of replacement cost. We will tell you plainly when that is the right call and when a roof has reached the end of its service life.
If you have an active leak, call (629) 238-0812 and we will schedule an inspection. Our metal roof repair team handles everything from a single lifted panel to storm and wind damage, and we document what we find so you understand the repair versus replace decision before any work begins.
We install the full range of metal systems and match the roof to the building. Standing Seam Metal Roofing uses concealed clips and no exposed screws, which makes it the premium choice for a primary home. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, workshops, and outbuildings around Rockvale and Walterhill. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option; when it is not, a full tear-off and Metal Roof Replacement is the right answer.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate, and the price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We give typical ranges rather than fixed numbers because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
See our pricing page for a general overview, then request a free estimate or free roof inspection so we can quote your actual roof. You will get a clear scope and a straight answer on whether repair, coating, or replacement makes the most sense for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. On permits, the rules are informational only: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and historic district or HOA design review can restrict panel profile and color choices.
Requirements vary, so always verify with the Murfreesboro building or planning department before starting your project. If you would like an inspection or documentation for your own records, contact us to schedule a visit.
Ready to get started? Murfreesboro Metal Roofing serves in Murfreesboro and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Murfreesboro · Response within 24h · No commitment · ☎ (629) 238-0812
Your Free Quote Request