Serving the Murfreesboro area  ·  (629) 238-0812  ·  Open Mon-Sun 7am-7pm
📞 (629) 238-0812 Free Quote

Metal Roofing in La Vergne, TN (37086) · Local Professionals

Murfreesboro Metal Roofing · Fast response in La Vergne and the Murfreesboro area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+336Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

La Vergne sits just northwest of Murfreesboro along I-24, and its mix of 1970s-1990s tract homes and newer lakeside properties means a lot of aging shingle roofs are ready for an upgrade. If you live off Waldron Road or near Lake Forest, you've probably seen the hail and wind that roll through Rutherford County.

Homeowners in La Vergne (37086) call Murfreesboro Metal Roofing because we know the local housing stock and the weather that hits it. From the older neighborhoods near the La Vergne Senior Center to the growing subdivisions off Fergus Road, we've helped property managers and homeowners replace worn shingles with metal roofs that handle Tennessee storms.

Metal Roofing in La Vergne (37086)

La Vergne's terrain is gently rolling, with thin red clay over limestone that can shift after heavy rain. Many homes have low-pitched shingle roofs from the 1980s and 1990s, and those roofs are now at the end of their life. The city also has pockets of lakeside lots near Percy Priest Lake where wind exposure is higher and ice damming can occur at the eaves. Tight lot lines in older subdivisions mean we often need to plan material staging carefully, and some properties have HOA design guidelines that affect panel profile and color. We know how to work within those constraints.

Our team has been serving La Vergne and the surrounding Murfreesboro area for years. We understand the local building department's permit process and can help you navigate it. Whether you need a full replacement, a retrofit over existing shingles, or a repair after a storm, we bring the same attention to detail that we would to our own homes.

Our services in La Vergne

How a Job Works in La Vergne

Step 1: You call us at (629) 238-0812 or request a free estimate online. We schedule an on-site assessment at your La Vergne property, usually within a few days. We inspect your current roof, check for damage, and discuss your options, including metal roof over shingles if your existing roof qualifies. We provide a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits from the city of La Vergne and schedule the work. On installation day, our crew arrives with materials and gets to work. We protect your landscaping and keep the site organized. If your home is in an HOA, we coordinate any needed approvals before we start. For tight lots, we plan deliveries to avoid blocking neighbors.

Step 3: After the job is done, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you're satisfied and that your new metal roof is performing as it should. We leave your property clean and ready for you to enjoy.

Pricing for metal roofing in La Vergne depends on the size and complexity of your roof, the material you choose, and whether we're doing a repair or a full replacement. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof over shingles at $7 per square foot. Repairs start at $450, and screw replacement starts at $750. For a typical La Vergne ranch home, a full replacement might range from $12,000 to $20,000, but we give you an exact quote after inspecting your roof. Call (629) 238-0812 for a free estimate.

My La Vergne home was built in the 1980s and has original shingles. Can you install a metal roof over them?
Possibly. Many older La Vergne homes have one layer of shingles, which may allow for a retrofit. We'll inspect your roof to confirm it meets code requirements for a metal roof over shingles. If it does, you can save on tear-off costs and get a new metal roof faster.
A storm just knocked limbs onto my roof in La Vergne. How quickly can you respond for emergency repairs?
We prioritize storm damage calls in La Vergne and the surrounding area. Call us at (629) 238-0812, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp active leaks and provide a detailed repair estimate.
What's the typical cost difference between a metal roof over shingles and a full replacement in La Vergne?
Metal roof over shingles starts at $7 per square foot, while a full replacement starts at $9 per square foot. The retrofit can save you 20 to 30 percent because it avoids tear-off and disposal. However, not all roofs qualify, so we'll check yours during a free estimate.
Do I need a permit for a metal roof in La Vergne, and can you help with that?
Yes, a permit is typically required for a roof replacement or re-roof in La Vergne. We handle the permit application and inspections for you, ensuring the work meets local codes. Requirements can vary, so we always verify with the city building department before starting.
My neighbor's tree hangs over my property line in La Vergne. Can I trim it to protect my new metal roof?
In Tennessee, you generally have the right to trim branches that overhang your property, but you should not damage the tree or trespass. We recommend talking to your neighbor first. If you're in an HOA, check the covenants for any specific rules about landscaping and property lines.
Are you fully insured for roofing work in La Vergne?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property in case of an accident. We're happy to provide proof of insurance upon request.
What maintenance does a metal roof need in La Vergne's climate?
In La Vergne, metal roofs should be inspected annually, especially after storm season. Check for loose fasteners, debris in gutters, and any signs of rust or damage. We offer maintenance plans and can perform a free inspection to catch small issues before they become costly repairs.
Why choose us?

Trusted professionals in Murfreesboro

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Murfreesboro

All your work handled by qualified professionals in Murfreesboro

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

336+ Verified Client Reviews in Murfreesboro

⭐⭐⭐⭐⭐ 4.9/5 · 336 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Murfreesboro · Response within 24h · No commitment · ☎ (629) 238-0812

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Murfreesboro ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm